Stihl FS 240 Notice D'emploi page 46

English
Definitions
1 Fuel Filler Cap
For closing the fuel tank.
2 Carburetor Adjusting Screws
For tuning the carburetor.
3 Starter Grip
The grip of the pull starter, for
starting the engine.
4 Shutter
With summer and winter positions.
Carburetor is heated in winter
position.
5 Spark Plug Boot
Connects the spark plug with the
ignition lead.
6 Muffler with Spark Arresting Screen
Muffler reduces exhaust noises and
diverts exhaust gases away from
operator.
Spark arresting screen is designed
to reduce the risk of fire.
7 Guard Plate
Protects the fuel tank.
8 Throttle Trigger
Controls the speed of the engine.
9 Stop Switch
Switches the engine's ignition off
and stops the engine.
10 Throttle Trigger Lockout
Must be depressed before the
throttle trigger can be activated.
11 Handlebar
For holding and controlling the unit
with the hand during operation.
44
12 Handle Support
Connects the shaft and bike handle.
13 Clamp Screw
Locks handlebar in selected
position.
14 Throttle Cable Retainer
Secures the throttle cable to the
drive tube.
15 Carrying Ring
Connects the unit to the harness.
16 Choke Lever
Eases engine starting by enriching
mixture.
17 Manual Fuel Pump
Provides additional fuel feed for a
cold start.
18 Filter Cover
Encloses and protects the air filter.
19 Fuel Tank
For fuel and oil mixture.
20 Loop Handle
For easy control of machine during
cutting work.
21 Barrier Bar
Helps keep user's feet and legs
clear of the cutting tool.
22 Spacer
Designed to reduce the risk of burns
and fire.
FS 240, FS 240 R