Stihl FS 240 Notice D'emploi page 49

Stroke: 30 mm
Engine power to 1.7 kW (2.3 bhp)
ISO 8893: at 8,500 rpm
Idle speed: 2,800 rpm
Cut-off speed (rated): 10,500 rpm
Max. output shaft
speed (cutting
attachment): 7,930 rpm
Ignition System
Electronic magneto ignition
Spark plug (resistor
type): NGK CMR6H
Electrode gap: 0.5 mm
This spark ignition system meets all
requirements of the Canadian
Interference-Causing Equipment
Standard CAN ICES-2/NMB-2.
Fuel System
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity: 750 cc (0.75 l)
Weight
Dry, without cutting attachment and
deflector
FS 240: 7.0 kg
FS 240 R: 6.6 kg
FS 240, FS 240 R
Overall length
without cutting attachment
FS 240: 1805 mm
FS 240 R: 1865 mm
Features
R Loop handle
Z Spark arresting screen
Maintenance and Repairs
Users of this machine may only carry out
the maintenance and service work
described in this user manual. All other
repairs must be carried out by a
servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are
regularly given the opportunity to attend
training courses and are supplied with
the necessary technical information.
When repairing the machine, only use
replacement parts which have been
approved by STIHL for this power tool or
are technically identical. Only use high-
quality replacement parts in order to
avoid the risk of accidents and damage
to the machine.
STIHL recommends the use of original
STIHL replacement parts.
Original STIHL parts can be identified by
the STIHL part number, the {
logo and the STIHL parts symbol K
(the symbol may appear alone on small
parts).
English
47