Mounting The Deflector - Stihl FSE 31 Notice D'emploi

Edging (FSE 41 only)
The unit can be quickly converted into a
power edger (see "Converting Unit to
Power Edger").
Use the unit as shown.
N
Guide the mowing line along the
N
edge of the lawn – hold the unit at
the right heightor use the bumper.
Disposal
Do not throw cuttings into the
garbage can – they can be
composted!
FSE 31, FSE 41

Mounting the Deflector

1
Position the deflector (1) on the
N
underside on the motor housing (2).
Deflector body must be on the left.
N
Rotate the deflector 90° in the guide
N
slots.
6
2
Locking pawl (3) must engage.
N
Take the screw (4) out of the
N
retainer, insert it in the hole (5) and
tighten it down firmly.
Pull the cover (6) off the line limiter
N
blade.
Fitting the Bumper (FSE 41 only)
Place the bumper (7) on the
N
pegs (8) and locators in the
deflector and secure in position with
the two screws (9).
English
3
4
5
9
7
8
27