Putting The Units Into Operation - switel BCF 850 Mode D'emploi

4 Putting the Units into Operation

Safety information
Attention: It is essential to read the Safety Information in Chapter 1 before starting up.
The data transmitted (image and/or sound) can be received publicly in the reception range!
Checking the package contents
The box contains:
1 camera unit
1 monitor unit
1 lithium-ion battery for the monitor
1 charging cable
(to charge the camera and monitor)
Putting the camera into operation
Charging the camera
Connect the camera as illustrated in the dia­
gram. The integrated battery (cannot be re­
moved) is charged.
Attention: Only use the charging
cable supplied for the camera.
To switch the camera on, press and
hold the On/Off button.
When charging the battery for the first time, it should be charged for at least 4 hours without inter­
ruption. This lengthens the service life of the battery!
Positioning and aligning the camera
There are several ways and means of positioning and aligning the camera:
S
Place the camera (without the stand mounted) in the camera base and align the camera in it as
required.
S
Screw the stand in the camera. The three stand legs are flexible. Bend the stand legs as necessary
and align the camera as required.
S
Screw the stand in the camera and use the clip on the stand to attach the camera to other objects.
Attention: The camera must not be set-up less than 1 m from the baby/child.
Attention: Position the camera unit with a minimum distance of 1 m to other electronic devices,
otherwise there is a risk of mutual disturbance.
Putting the Units into Operation
38
39
1 camera base
1 stand
1 operating manual
Mains power outlet
67