switel BCF 850 Mode D'emploi page 73

Deleting videos
1. Press the Menu/OK button on the monitor to open the menu.
2. Use the Scroll right button or Scroll left button to select the
3. Use the Scroll up button or Scroll down button to select the storage location.
4. Press the Menu/OK button to confirm your selection. The recordings available are listed.
5. If you only want to delete one recording: Use the Scroll up button or Scroll down button to select the
recording to be deleted.
6. Press the Speak/Delete button. Information appears in the display on how to proceed:
7. Use the Scroll up button or Scroll down button to select whether to delete the selected recordings
only or all the recordings.
8. Press the Menu/OK button to confirm your selection.
9. Press the Menu/OK button to execute the deleting process. Or:
Press the On/Off / Back button to cancel the deleting process.
Connecting the monitor to the computer
Connect the monitor to a computer using a suitable USB data cable (not included with the equipment) in
order to transfer data stored in the monitor (Local) memory to the computer.
If you also want to view, edit or store the recordings on a computer, for example, it is recom­
mended to save the recordings on the monitor on a microSD card (not included with the equip­
ment), refer to Section "Inserting or removing the microSD card".
Defining personal settings on the monitor
Various settings can be defined according to your personal requirements using the menu:
Language
The menu guidance is available in 4 different languages, refer to "Menu Structure" (Language), Page 65.
Display brightness
The brightness of the display can be adjusted to one of 7 levels; see Menu Structure (Backlight),
Page 65.
Camera settings
You can set the following features separately for each camera registered on the monitor with regard to the
transfer. The setting is defined via the menu, refer to "Menu Structure"
S
Brightness
S
Contrast
S
Saturation
S
Frame Rate
S
(Infrared (use of infrared radiation for the night vision function , refer to Section "Night vision
function", Page 70)
Energy-save mode
44
When energy-save mode is activated, the monitor display and the audio/video transmission from the cam­
era unit to the monitor unit are deactivated after a defined time. This helps lengthen the battery charge
times of the camera and monitor.
Use the "Power
switch to energy-save mode, refer to "Menu Structure" Page 65.
Press any button on the monitor to end energy-save mode.
If the voice operated transmitter (VOX) and/or the motion detector have been activated, the sys­
tem ends energy-save mode automatically immediately it detects a voice, sound and/or move­
ment, refer to the following sections.
(number of frames transferred per second)
Saving" menu option to define the number of seconds after which the equipment should
Operating the Monitor
Playback menu option.
(Camera Control), Page 66.
73