Operation; Volume; Battery Charge Indicator And Battery Low Warning; Language - switel BCC 51 Mode D'emploi

5 Operation

Once you have set up your Baby Monitor, you will be able to hear the sounds in your baby´s room
through the Parent Unit. You will also be able to see those sounds as green and red sound sensor
lights around the top of the Parent Unit, which rise and fall with the volume level − the more lights, the
louder the noise, with the red lights being the loudest.
If the connection between the Parent Unit and Baby Unit is broken at any time the green Link"
light on the Parent Unit will flash and the green and red sensor lights will cease to react to any
sounds. To re−establish the Link", follow the directions in the Troubleshooting" chapter.

Volume

You can adjust the volume at which you hear your baby by using the Up/Down Keys on the side of
the Parent Unit. This will not effect the sensitivity of your Baby Monitor, only the volume at which you
hear those sounds through the Parent Unit.

Battery Charge indicator and battery low warning

The Parent Unit will work up to 10 hours out of the Charger Pod, but this depends on the level of
charge in the batteries. The charge level is indicated by the battery icon on the Display. If the charge
becomes low, a battery low warning beep" will sound and the battery icon on the Parent Unit´s
Display will begin to flash. If this occurs you should return the Parent Unit to the Charger Pod to
re−charge the batteries. You can still use your Parent Unit from the Charger Pod.

Language

Your Baby Monitor can be set to Display its information in different languages.
To change the language
At the Parent Unit
1. Press the Menu Key, then use the Up/Down Keys to scroll to [Language]. Press the OK Key.
2. The Display shows [ENGLISH]. Use the Up/Down Keys to scroll to your chosen language. Press
the OK Key. The Display briefly shows [Saved] and your chosen language will now be set.

Clock

You can set the Display of the Parent Unit to show the current day and time. This can be shown as
either the 24 or 12 hour clock (your monitor is pre−set to show the 24 hour clock). You will need to set
the clock if you wish to use the Feed Timer feature.
If you have unplugged your Baby Monitor from the power supply, you will need to reset the
Clock the next time you use it.
To set the time
At the Parent Unit
1. Press the Menu Key then use the Up/Down Keys to scroll to [Clock]. Press the OK Key.
2. Display shows [Set time]. Press the OK Key.
3. Display shows [Year]. Use the Up/Down Keys to scroll to the correct year. Press the OK Key.
4. Display shows [Month]. Use the Up/Down Keys to scroll to the correct month. Press the
OK Key.
5. Display shows [Day]. Use the Up/Down Keys to scroll to the correct day. Press the OK Key.
6. Display shows [Hour]. Use the Up/Down Keys to scroll to the correct hour using the 24 hour
clock. Press the OK Key.
All manuals and user guides at all-guides.com
− Operation −
57