Télécharger Imprimer la page

Peg-Perego VIAGGIO 2-3 SURE FIX Notice D'emploi page 24

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
5• Lift the backrest of the child seat
until you hear it click (fig_a).
The backrest can move between the
two locks, as indicated in figure b.
When the operation is completed, the
product is free-standing.
Features of the product
6• The headrest can be adjusted in 6
positions. Lift the handle on the rear
of the backrest and position it at the
desired height.
IMPORTANT: as the child grows,
it is necessary to adjust the height
according to the stature of the
child.
IMPORTANT: after completing
the operation, try moving the
headrest to verify that it is correctly
fitted in place.
7• Viaggio 2/3 Surefix is fitted with two
lateral and removable drink holders.
8• Viaggio 2/3 Surefix is fitted with a
reclination system that guarantees
maximum comfort. To recline the
seat, pull the handle on the front and
simultaneously lift the seat.
9• If possible, recline the car's backrest
while the child is asleep and then
recline the backrest of the child seat to
the same slant.
The Viaggio 2/3 Surefix backrest will
adapt to the slant of the car' s backrest,
guaranteeing greater comfort for your child.
Fitting the child car seat
with the safety belts and
Surefix fittings
For cars fitted with Isofix
hooks
This method can be used only if the car
is fitted with Isofix hooks.
For further information on the
availability of these hooks and their
location, refer to the instruction manual
of the car. L'aggancio con i connettori
surefix garantisce una maggior
stabilità e sicurezza in auto, ma non
sostituisce la funzione delle cinture
del veicolo.
10• To stretch the Surefix hooks, press
the button on the front inside the bag,
as shown in the figure, and stretch
them manually.
11• Fix the Surefix connectors to the
Isofix hooks of the car seat, verifying that
they "click" in place. Tension the belt and
simultaneously push the child car seat
towards the backrest of the car seat.
IMPORTANT: after completing
the operation, try moving the seat to
verify that the Isofix fittings have been
correctly hooked to the Isofix fittings .
12• To detach the Surefix connectors of
the child car seat from the Isofix hooks,
press the button on the front inside
the bag and release the connectors
belts in order to be able to manually
detach them by pressing the safety
lever situated on the hooks, as shown
in the figure.
Fitting the child car seat
with the safety belts
For cars that are NOT
fitted with Isofix fittings
24
13• Pl
seat in
the fig
How
on V
14• S
safety
15• Fi
ensuri
the tw
in the
16• To
safety
above
IM
tensio
alway
17• T
positio
below
safety
IM
shoul
the ch
How
from
When
2/3 Su
eleme
but ke
REMO
SEAT:
18• D
bag fr
seque
the ce

Publicité

loading