Standalone Backend-System" Operating Mode; Networked" Operating Mode - Mennekes AMEDIO Professional+ 22 Manuel D'utilisation

6.2.3 "Standalone Backend-System" operating mode

The device can be connected via wireless communication
or ethernet to a Backend-System. The device is operated
via the Backend-System.
A connection to a Backend-System via USB or
WLAN is not possible.
A micro SIM card is required for connecting via
wireless communication.
f Insert the SIM card.
Î "6.3 Inserting the SIM card"
f Navigate to the "Settings" menu and set the following
parameters:
Parameters Settings / description
Connection Type f Select "GSM" or "Ethernet".
Free charging f Select "Off".
Access Point Name Name of the access point of your
(APN) mobile access
APN Username User name for the access point of
your mobile access
APN password Password for the access point of
your mobile access
OCPP Mode Selection of the OCPP communi-
cation protocol
If "OCPP Mode" = "OCPP-S 1.5" or "OCPP-S 1.6":
SOAP OCPP URL of URL address of the Backend-
backend (standard System
OCPP)
If "OCPP Mode" = "OCPP-J 1.6":
WebSocket JSON WS / WSS-URL of the OCPP
OCPP URL of Backend-Systems
Backend
HTTP Basic An empty field prevents the HTTP
Authentication pass- Basic Authentication
word
If "OCPP Mode" = "OCPP-B 1.5" or "OCPP-B 1.6":
Not relevant for the device
Hostname (Binary Not relevant for the device.
OCPP)
Portnumber (Binary Not relevant for the device.
OCPP)
„ Information concerning APN is provided by
your mobile network operator.
„ Information concerning OCPP and the pass-
word for HTTP Basic Authentication are provi-
ded by your Backend-System operator.
We recommend using a secure Internet connec-
tion to communicate with the backend system.
This can be done, for example, via a SIM card
provided by the backend system operator or
via a connection secured by TLS. In the case of
access via the public Internet, at least the HTTP
basic authentication should be activated, other-
wise the data will be transmitted in a format that
is readable for unauthorised third parties.
f Click the "Save" button.
f If necessary, make the appropriate advanced settings
in the "Operator" menu, e.g. enter the PIN of the SIM
card.
f When the configuration is concluded, click the "Save &
Restart" button.

6.2.4 "Networked" operating mode

For Professional+ (PnC) 22 (T2S) versions only.
Several devices are connected via ethernet. This enables
use of local load management and a connection to the
Backend-System can be established for all networked
devices (via gateway).
A detailed description of load management
with application examples can be found on our
website in the download section of the selected
product.
Requirement:
9
The devices are networked and can be reached via
the network.
Î "5.6 Networking devices"
EN
23