Device Structure - Mennekes AMEDIO Professional+ 22 Manuel D'utilisation

3.3 Device structure

Exterior view
Fig. 3: Exterior view (example)
1. LED information panel with RFID reader
2. Type 2 charging socket (mode 3) with hinged lid *
3. Inspection window for energy meter
4. Front panel
5. Lock for unlocking the cover
6. Cover
* Only available with Professional+ (PnC) 22 (customized-1)
variants
Inside view
Fig. 4: Inside view (example)
1. Charging socket *
2. MENNEKES ECU *
3. Differential current transformer *
4. Control fuse
5. Surge protection
6. Shunt release * **
7. Ethernet surge protection **
8. Terminals for mains connection
9. Line circuit breaker *
10. Residual current circuit breaker *
11. Calibrated energy meter (MID approved only for the
three-phase mains connection) *
12. Phase sequence relay *
13. Power supply unit
* One available for each charging point
** Only available with Professional+ (PnC) 22 (T2S) variants
EN
7