Mennekes AMEDIO Professional+ 22 Manuel D'utilisation page 69

WAN router
Block 3: Networking via Ethernet
Parameter
Mode for ethernet configu-
ration
DHCP client hostname
DHCP client request retries
DHCP client request timeout
DHCP client request delay
Static network configuration
IP
Static network configuration
netmask
Static network configuration
gateway
Static network configuration
DNS
Block 4: Networking via WLAN - Networking multiple devices via WLAN is not possible.
Parameter
WLAN SSID
WLAN password
Mode for WLAN configuration
DHCP client hostname
DHCP client request retries
DHCP client request timeout
DHCP client request delay
Static network configuration IP
Static network configuration netmask
Static network configuration gateway
Static network configuration DNS
Access from ethernet interface
to WAN interface (GSM)
Description
Mode for network configuration of charging
point
Host name that is sent to the DHCP server
together with DHCP requests
Number of DHCP client request retries
DHCP client request timeout (in seconds)
Wait time between DHCP client requests (in
seconds)
IP address for static IP address configuration
Network screen for static IP address configu-
ration
Gateway address for static IP address confi-
guration
DNS server for static IP address configuration
Description
Network
Necessary Remark
for ...
Preset: "Auto (DHCP
Client)"
Preset: "10"
Preset: "10"
Preset: "10"
Network
„ Only relevant if "Mode
for ethernet confi-
guration" = "Manual
config"
„ The specifics for the
static IP address need
to be selected accor-
ding to your router or
switch.
Necessary for ... Remark
Not relevant for the device
Not relevant for the device
Not relevant for the device
Not relevant for the device
Not relevant for the device
Not relevant for the device
Not relevant for the device
Not relevant for the device
Not relevant for the device
Not relevant for the device
Not relevant for the device
EN
25