switel WTC590 Mode D'emploi page 39

Confirmation signal (Roger beep)
The confirmation signal is issued on releasing the P button. This signals to the
other party that you have ended transmission.
5 x M
U / D, [ OF ] P
Key tone
The key tone can be switched on or off.
6 x M
U / D [ ON ], P
U / D [ OF ], P
Dual−channel monitoring
When dual−channel monitoring is activated, the walkie−talkie automatically switches
between two channels until a communication signal is detected. This means you can
talk to two callers on separate channels.
Starting dual−channel monitoring
7 x M
U / D, M
U / D, P
Ending dual−channel monitoring
7 x M
U / D [ OF ] / [ ON ],
P
Ringing tone
The ringing tones indicate to other subscribers that you want to talk to them. A condi-
tion for this is that the other subscribers are using the same channel and CTCSS
code.
‘
Monitor function
The Monitor function enables the search for weak signals on the channel currently set.
If you receive an external signal, switch to a free channel. Always communicate with
other subscribers on a free channel to prevent interference.
M D
P
M
Operating the Walkie−Talkies
When dual−channel monitoring is active, the channel currently set and the
additional channel appear alternately in the display.
Open the menu
Switch the confirmation signal on or off and
confirm it
Open the menu
Switch the key tone on
Switch the key tone off
Open the menu
Select an additional channel
Change the CTCSS code
Open the menu
End dual−channel monitoring
Transmit the ringing tone
Monitor the channel
Enter the conversation
End monitoring
39