Disposal; General; Disposal Of Materials - Atlas Copco HiLight E2 Manuel D'instructions

9

Disposal

9.1

General

When developing products and services, Atlas Copco
tries to understand, address, and minimize the
negative environmental effects that the products and
services may have, when being manufactured,
distributed, and used, as well as at their disposal.
Recycling and disposal policy are part of the
development of all Atlas Copco products. Atlas
Copco company standards
requirements.
Selecting materials the substantial recyclability, the
disassembly possibilities and the separability of
materials and assemblies are considered as well as the
environmental perils and dangers to health during the
recycling and disposal of the unavoidable rates of not
recyclable materials.
Your Atlas Copco light tower mainly consists of
metallic materials, that can be re-melted in steelworks
and smelting works and that is therefore almost
infinite recyclable. The plastic used is labelled;
sorting and fractioning of the materials for recycling
in the future is foreseen.
determine strict
9.2

Disposal of materials

Dispose contaminated substances and material
separately,
environmental legislation.
Before dismantling a machine at the end of its
operating lifetime drain all fluids and dispose of
according the applicable local disposal regulations.
Separate the machine into metal, electronics, wiring,
hoses, insulation and plastic parts.
Dispose all components according to the applicable
disposal regulations.
This concept can only succeed with
your help. Support us by disposing
professionally. By assuring a correct
disposal of the product you help to
prevent possible negative
consequences for environment and
health, that can occur with an
inappropriate waste handling.
Recycling and re-usage of material
helps to preserve natural resources.
according to local applicable
- 33 -