Precautions; Use Of Maintenance Schedule; Ordering Spare Parts; Replacing The Lamps - Atlas Copco HiLight E2 Manuel D'instructions

5.1.1

Precautions

– Do not carry out any change or modification to
any part of the light tower or its electric system.
– Do not carry out any maintenance when the light
tower is running.
5.1.2

Use of maintenance schedule

Regular maintenance is essential for the optimum
performance, safe operation and a longer working life
of the machine.
The maintenance schedule contains a summary of the
maintenance instructions. Read the respective section
before taking maintenance measures.
When servicing, replace all disengaged packing, e.g.
gaskets, O-rings, washers.
The maintenance schedule has to be considered as a
guideline for units operating in a dusty environment
typical to light tower applications. The maintenance
schedule can be adapted depending on application,
environment and quality of maintenance.
5.1.3

Ordering spare parts

It is possible to order spare parts for the light tower by
making reference to the parts as mentioned in the
enclosed Parts List manual.
Always quote the part number, the designation and
the quantity of the parts required, as well as the type
and the serial number of the machine.
5.1.4

Replacing the lamps

Do not touch the lamps when they
are still hot without having taken all
necessary precautions.
recommended that protective gloves
are always worn.
1. Release the 4 clamps (1) and rotate them to open
the protection glass. The glass must stay hinged
on the bottom part of the floodlight.
1
1
- 29 -
2. Remove the lamp, first releasing the safety spring
(2) placed around the lamp and then unscrewing
the lamp from its seat (3).
It is
1
1
3. Install the new lamp and re-install the safety
spring (2).
4. Lock the protective glass using the 4 clamps and
remember to carefully tighten the screws with a
screwdriver.
3
2