Checks And Trouble Shooting; Options Available For Hilight E2 And E3+ Units; Overview Of The Mechanical Options; Overview Of The Electrical Options - Atlas Copco HiLight E2 Manuel D'instructions

6 Checks and trouble
shooting
Never perform a test run with
connected power
touch an electrical
without a voltage check.
When a failure occurs, always
report what you experienced before,
during and after
Information with regard to the load
(type, size, power factor, etc.),
vibrations, insulation check, odours,
output voltage, leaks and damaged
parts, ambient temperature, daily
and normal maintenance
altitude might be helpful to quickly
locate the problem. Also report any
information regarding the humidity
and location of the light tower (e.g.
close to sea).
7 Options available for
HiLight E2 and E3+ units
7.1 Overview of the mechanical
cables. Never
options
connector
The following mechanical options are available:
– Special colour
the failure.
7.2 Overview of the electrical
options
The following electrical options are available:

– Photocell

and
- 30 -
7.3 Description of the electrical
options
7.3.1 Photocell
P7
P7.1.....Photocell
Measures the luminosity and can be
activated by sunlight.
P7........Photocell sensitivity regulator
Is used for regulating the luminosity
sensitivity level of the photocell.
P7.1