Image Parameters - Comelit IPPTZ120IRD Manuel Utilisateur

Image parameters

1)
ImageParam
Click Setting→ AV→ ImageParam→ ImageParam , IP Speed Dome " ImageParam" interface, as shown in Figure 3-27:

Black to Color/Color to Black: according to the environment need, users can set Day/night and Night/day switch sensitivity 1-255

AWB Mode: according to the environment color temperature, users can set the white balance, Auto option for normal light
environment, adjust the white balance mode by drop down list selection

Video formats: select the video format, 50HZ for PAL, 60HZ for NTSC

Exposure mode: select Auto or Handle at the drop down list

Max shutter: select the max shutter value at the drop down list

Min shutter: select the minimum shutter value at the drop down list

Max gain: select the max gain value at the drop down list

3D Dec level: select the 3DNR level at the drop down list, default is 3

EV: select the exposure compensation value at the drop down list, default is 0

BLC: Close/Open selectable, default is Close

HLC: Close/Open selectable, default is Close

Slow shutter: Close/Open selectable, default is Close

Pene fog: Defog, Close/Open selectable, default is Close
After setting, click to save it.
Figure 3-27
25