Comelit IPPTZ120IRD Manuel Utilisateur page 14


PTZ Watch: at the PTZ Watch drop down list, users can select the PTZ watch type (Include close, preset, CRZ, pattern, area, etc)
and set the idle time, then click

Preset: adjust the camera to the appointed angle and location through directional buttons, and then select a preset number in the
preset drop down list, click
to call the preset. As shown in Figure 3-9.

Pattern scan: at the pattern scan drop down list, users can select the pattern scan number, and edit the pattern scan name. Then
click to start recording, click
scan. As shown in Figure 3-9.

CRZ: At the CRZ drop down list, users can select cruise number, click
click to delete it. Finally click
to save it. As shown in Figure 3-10.
Figure 3-10
to set it. There are 1-255 presets can be set, and users can click
to stop recording, pattern scan remembered automatically. Click
to save it and click
Figure 3-11
10
to add preset, set the delay time. Select preset ID and
to call cruise. As shown in Figure 3-11.
to delete the preset, click
to call pattern