Motion - Comelit IPPTZ120IRD Manuel Utilisateur

Linkage Setting:

Alarm Output: select the status of alarm output , Normal Open or Normal Close

Alarm Output Time: set the length of time for alarm output

IO channel: set the alarm linkage device input port

Preset ID: click

Snap/Record: set the alarm output type, None / Snap picture / Record / Snap record selectable

Email: click to enable Email alarm upload

IO Output: click

Activate Level: select the status of activating alarm, Normal Open or Normal Close

FTP upload: click
Time setting:

Add task: add new alarm period

Del task: delete the specified time period

Copy to: Copy the current alarm period to the other day
After setting, click

Motion

1) Motion Detect
Click Setting→ Alarm Conf→Motion→Motion Detect, IP Speed Dome " Motion Detect " interface, as shown in Figure 3-36:

Enable: click

Sensitivity: set the sensitivity, 1-10 levels adjustable

Clear all: clear all motion detection setting
After setting, click
to enable linkage preset and set the preset number
to enable device alarm output port and set the IO output number
to enable FTP alarm upload
to save it.
to enable motion detection, there are max 4 motion detection
to save it.
Figure 3-36
31