Maintenance And Troubleshooting; 10.1. Safety Instructions; 10.2. Maintenance Of The Probe - Burkert 8221 Manuel D'utilisation

Maintenanceandtroubleshooting
10. mAinTenAnce AnD
TroubleshooTinG

10.1. safety instructions

danger
risk of injury due to high pressure in the installation.
• Stop the circulation of fluid, cut off the pressure and drain the
pipe before loosening the process connections.
risk of injury due to electrical voltage.
• Shut down the electrical power source of all the conductors and
isolate it before carrying out work on the system.
• Observe all applicable accident protection and safety regulati-
ons for electrical equipment.
risk of injury due to high fluid temperatures.
• Use safety gloves to handle the probe.
• Stop the circulation of fluid and drain the pipe before loosening
the process connections.
risk of injury due to the nature of the fluid.
• Respect the prevailing regulations on accident prevention and
safety relating to the use of aggressive fluids.
Type 8221
Warning
risk of injury due to non-conforming maintenance.
• Maintenance must only be carried out by qualified and skilled
staff with the appropriate tools.
• Ensure that the restart of the installation is controlled after any
interventions.

10.2. maintenance of the probe

The probe can be cleaned with a cloth dampened with water or a
detergent compatible with the materials the probe is made of.
Please feel free to contact your Bürkert supplier for any additional
information.
Check the O-rings regularly.
English
23