Philips Energy Light HF3419 Mode D'emploi page 16

English
16
EMC information
Recommended separation distance between portable and
mobile RF communications equipment and HF3419
HF3419 is intended for use in the electromagnetic environment in which radiated RF disturbances are
controlled. The customer or the user of HF3419 can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF communications equipment
(transmitters) and HF3419 as recommended below, according to the maximum output power of the
communications equipment.
Rated maximum output power of transmitter (W)
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in meters (m) can be estimated using the equation applicable to the frequency of the
Compliant with the Waste Electrical and
Electronic Equipment/Restriction of the Use of
Certain Hazardous Substances in Electrical and
Electronic Equipment (WEEE) recycling
directives.
Philips shield
Manufactured for: Philips Consumer Lifestyle B.V,
Tussendiepen 4, 9206 AD Drachten, Netherlands.
Fax: +31 (0)512594316
Date code and serial number of this appliance
On/off button
Decreasing light intensity button
Increasing light intensity button
800 MHz to 2.5 GHz d = 0.70 Ö P
0.07
0.22
0.70
2.21
7.00