Maintenance And Repair - Franke SMART GN 42 ST XS Manuel D'installation Et Mode D'emploi

EN
Replacing Oven Lamp
WARNING: to avoid electric shock, ensure that
the appliance circuit is open before changing
the lamp (having circuit open means
power is off).
X Z
First disconnect the power of appliance
and ensure that appliance is cold.
X Z
Remove the glass protection by turning
as indicated in the figure on the left side.
If you have difficulty in turning, then using
plastic gloves will help you in turning.
X Z
Then remove the lamp by turning, install
the new lamp with same specifications.
X Z
Reinstall glass protection, plug the power
cable of appliance into electrical socket
and complete replacement. Now you can
use your oven.

MAINTENANCE AND REPAIR

Troubleshooting guide
You may solve the problems you may encounter
with your product by checking the following
points before calling the technical service.
Z Z
Check if electrical cable of the oven is
plugged.
Z Z
Safely check if there is power in
the network.
Z Z
Check the fuses.
Z Z
Check if electrical cable of the oven
is damaged.
GN 42 ST XS
Lamp assemb
220-240 V, AC
15 W
– 14 –