Publicité
Template turning
Copying templates can be made of various materials,
veneered plywood is perfectly suitable. The template is
similar to the contour of the piece to be turned. (Fig. 19).
To use the copying template as a pattern lift the holding
device up and secure between centring points of copying
grips (Fig. 20).
Loosen clamping screws of the holding
lath (Fig. 21) to allow stretching the template.
During turning the template is moved
along as often as required contour is
formed at the workpiece.
Servicing
Do you have any technical questions? A claim? Do you
need spare parts or the Operating Instructions?
You will be helped quickly and without needless bureaucracy
at our webpage www.guede.com in the Service part.
Please help us be able to assist you. To be able to identify
your appliance when claimed, we need to know its serial No.,
order No. and year of production. All these details can be
found on the type label. Enter the details below for future
reference.
Serial No.:
Order No.:
Year of production:
Tel.:
+49 (0) 79 04 / 700-360
Fax:
+49 (0) 79 04 / 700-51999
E-Mail:
support@ts.guede.com
EU – DECLARATION OF COMPLIANCE
We,
Güde GmbH & Co. KG
Birkichstrasse 6
D-74549 Wolpertshausen
Germany
herewith declare that the following appliance complies with the
appropriate basic safety and health requirements of the EU Directives
based on its design and type, as brought into circulation by us. In
case of alternation of the machine, not agreed upon by us, this
declaration will lose its validity.
Machine description: GDM 1000
Article-No.: 11420
•
Date/authorised signature:
Title of signatory:
Geschäftsführer
•
Technical documentation:
•
Applicable EU Directives:
2004/108/EC
2006/42/EC
Applicable harmonised standards:
EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3
EN ISO 14121-1
EN 61029-1
16.09.11
Hr. Arnold,
J. Bürkle FBL; QS
Publicité
