Areas Of Application; Components And Functional Elements - Renfert Silent TS2 Mode D'emploi

3.1.1 Areas of Application

In the dental laboratory different areas of application are possible.
Depending on the amount of dust to be extracted and the extraction performance available, both suc-
tion hoses can either operate together, or if preferred, each tube alternately.
Standard Workbench (WB)
Work Preparation (WP)
Device (D)
Recommended use of the suction hoses:
WB + WB Suction hoses A and B simultaneously
WB + WP Suction hoses A and B simultaneously
WP + WP Suction hose A or B alternatively
D + D Suction hose A or B alternatively
WB + D Suction hose A or B alternatively
WP + D Suction hose A or B alternatively
3.2

Components and Functional Elements

1 Silent TS2
2 Key-pad
3 On / off switch
4 Front panel/ Fine filter
5 Front panel/ Dust drawer
6 Fine filter
7 Dust drawer
8 Mains cable
9 Device coupler socket (A, B)
10 Device protection switch
11 Electronic filter
1
2
4
17 12
Area of application
Grinding, separating, polishing, etc. of different dental materials such
as alloys, acrylics, porcelains, plasters, etc. in normal amounts using
the technician's hand piece.
Mainly grinding plasters and acrylics in large amounts using the tech-
nician's hand piece
Dust intensive devices such as the fine / recyclable sandblaster, etc.
3
6
7
5
12 Compressed air connection with com-
pressed air filter (Compressed air tube is
sealed)
13 Motor compartment cover
14 Exhaust air filter
15 Pinch valve with extractor connection fitting
(rotatable)
16 Suction pipe
17 Connection set
18 Suction hose
9
8
15
15
16
18
- 5 -
10 12 11 9
13
14
Fig. 1
EN