Connecting To The Pc; Connecting Printers And Decoders - Siemens Simatic Externer Prommer Notice D'utilisation

External Prommer
2.5

Connecting to the PC

The external prommer is connected to one of the parallel LPT interfaces of
your PC.
Proceed as follows:
1. Switch off your PC.
2. Plug the Centronics cable included with the prommer into the parallel
LPT interface of your PC.
3. Plug the other end of the Centronics cable into the socket on the
external prommer with the inscription PC.
Note
The external prommer may only be connected to the PC with the
connecting cable supplied C79195-A3863-H150.
2.6

Connecting Printers and Decoders

Printers or other devices (for example, decoders) which were connected to
your PC via the parallel interface must now be connected to the parallel
interface of the external prommer with the inscription "Printer" (Type A).
1. First, plug the decoder into the second parallel interface on the external
prommer with the inscription "Printer."
2. Then connect the printer to the connector on the decoder.
3. If connected, switch on the printer.
External Prommer
C79000-K8576-C120-02
Quick Reference Guide
5