Configuring The Ud Radio Remote Control; Programming - Jay Electronique UD Série Notice Technique D'installation Et D'utilisation

3.5- UD system configuration and parameter setting
The following parameters are configurable from the UDE transmitter unit :
• Transmit frequency (radio channel number selection).
• The "Dead man" function duration (01 to 98 minutes and infinite).
• Copy of electronic key identity code to transmitter memory.
These configuration operations use procedures implementing buttons n°1, n°2, n°3, stop plamswitch
and "On/Horn" without having to open the transmitter or the receiver.
By a specific operating mode, the person in charge of the equipment can lock or unlock the
access to the programming of Transmit frequency and "Dead man" function duration by locking or
unlockin the electronic key (see §3.5.1).
"On/Horn" button
(Can replace programming
button n°3 in certain cases, see
below)
Programming limitations by the button type implanted at position «button n°1»,
«button n°2» and «button n°3» on the UDE transmitter :
In order for the four programming functions to be programmable (locking-unlocking the electronic
key, frequency, "Dead man" duration and identity code copy), button n°1 and button n°2 must be
single or double speed pushbuttons (BPSV or BPDV).
If not, certain functions may not be accessible to the user. The table below shows the programming
modes available in accordance with the buttons n°1 and n°2 used :
n 5 n 6
n°3 n°4
n°1 n°2
If programing button n°3 is not of BPSV or BPDV type, the "On/Horn" button takes then the role
of programming button, and substitutes itself for button n°3.
Configuration parameters which cannot be programmed by the user will be taken into account on
the sales order and will not be re-configurable once the transmitter is manufactured.
However, it is always possible to order an electronic key containing the desired parameters
(reference: UDWE22)
FR EN
- 80 -

Programming

n°3
button
Programming
n°1
button
Button
n°1
BPSV or
BPDV
BPSV or
BPDV
Other button type *
* : COM2, COM3, COM3R, BPTR or Cover
DE
n°5 n°6
n°3 n°4
n°1 n°2
"Locking-
Button
unlocking" the
n°2
electronic key
BPSV or
YES
BPDV
Other * NO
NO
Programming
n°2
button
stop plamswitch button
Working "Dead man"
frequency function time
programming programming
YES YES
NO YES
NO NO
UD - 319472K
Copying
electronic key
identity code in
transmitter
YES
NO
NO