Configuring The Receiver Udr - Jay Electronique UD Série Notice Technique D'installation Et D'utilisation

3.6- UDR receiver configuration
The following parameters can be configured on the receiver :
•
Transmitter button interlockings :
Factory configured or using a PC via serial link option (ref.:UDWR32) with PC
software DialogUD (ref.:UDWR36).
•
Transmitter buttons / receiver function relays correspondence :
Factory configured or using a PC via serial link option (ref.:UDWR32) with PC
software DialogUD (ref.:UDWR36).
•
Transmit radio frequency :
The radio reception frequency (channel No.) can be programmed in two ways:
•
By the transmitter matched to the receiver implementing the transmitter
frequency programming procedure, see §3.5.2.
•
By using a PC via serial link option (ref.:UDWR32) with PC software DialogUD
(ref.:UDWR36).
The receiver reception frequency (channel No.) can be read :
•
By using a PC via serial link option (ref.:UDWR32) with PC software DialogUD
(ref.:UDWR36).
UD - 319472K
DE EN FR
- 85 -