Configuring The Ur Radio Remote Control - Jay Electronique UR Série Notice Technique D'installation Et D'utilisation

6.3- Configuring the transmitter
The following parameters are configurable from the transmitter unit :
• Transmit frequency, channel number from 01 to 64,
• The "Dead man" function duration and the unit from 01s to 98mn and infinite if the counting unit is
in minutes (standard) and duration adjusted to "99".
• Copy of electronic key identity code to transmitter memory.
These configuration operations use procedures implementing buttons n°1, n°2, stop plamswitch and
"On/Horn" without having to open the transmitter or the receiver.
By a specific operating mode, the person in charge of the equipment can lock or unlock the access to
the programming (see §6.3.1).
Programming
n°1
button
"On/Horn"
button
Orange indicator light
FR EN
- 70 -
électronique
n°3
n°1
See next pages for configuration procedures
DE
n°4
Programming
button
n°2
Green indicator light
Stop plamswitch button
n°2
UR - 323245J