Table des Matières
Publicité
Installation
4. Suivez les instructions ci-dessous pour remplacer les orifices.
1/2" Wrench
Front Burner Orifice
Screw each LP orifice in so the
orifice protrudes 15/16" (24mm)
(indicating full insertion).
© Travis Industries
(for qualified installers only)
Rear Burner Orifice
Use a 1/2" open end wrench
a
to unscrew the two orifices.
c
15/16"
24mm
Apply thread sealant to the LP
orifices prior to installation. Use
the chart below to identify the
correct orifices.
Look here for the orifice identification
NG
Front
#48
Rear
#39
4121004
b
LP
1.25mm
.0625"
43
100-01299
Publicité
Table des Matières
