gourmetmaxx Z 03640 Mode D'emploi page 20

EN
Risk of electric shock and fi re
■ Only connect the device to a properly installed socket with protective earth contacts.
The socket must also be easily accessible after connecting so that the mains con-
nection can be quickly disconnected. The mains voltage must correspond to the
technical data of the device. Only use proper extension cords, whose technical data
correspond to those of the device.
■ If the device falls in water, immediately disconnect the power supply. Do not attempt
to pull the device out of the water when it is connected to the mains supply!
■ Never touch the device, the mains cord and the mains plug with wet hands when
these components are connected to the mains supply.
■ Turn the device off and pull the mains plug out of the socket if a fault occurs during
operation or before a storm.
■ Always pull on the plug itself and never on the mains cord!
■ Only use the device in enclosed areas.
■ Do not use the device in rooms containing easily fl ammable dust or toxic and explo-
sive vapours.
■ Do not operate the device in very moist environment or in the vicinity of fl ammable
material.
■ Never use the device on a stove top or if a gas source is nearby.
■ Do not place any fl ammable materials such as paper, cardboard or plastic in or on
the device.
■ Never cover the device with cloths or the like. Danger of overheating!
■ For your own safety, check the device for damages each time before using it. Only
use the device if the device, adapter, mains cord and the plug do not exhibit any
damages!
Avoiding damage to materials, property and the device
■ Always place the device on a dry, level and solid surface with adequate space on all
sides.
■ During operation, make sure the device has a stable position.
■ Lay the cable so that it does not pose a tripping hazard. Do not allow the cable to
hang over the edge of a table or kitchen worktop. Someone could catch him/herself
and pull down the device.
■ Make sure that the mains cord does not get pinched, kinked or laid over sharp edges
and does not come into contact with hot surfaces.
■ Each time before using the device, check whether the device is clean, dry and that it
has been correctly assembled.
■ Do not insert any objects into the device vents and make sure that no objects are
blocking the vents.
■ Only use the device if it has been completely assembled, is not damaged, and is fully
functional!
■ Before you switch the device on, make sure that the lid of the mixing container is
correctly mounted on the mixing container.
■ Never switch the device on if the mixing arm has not been folded down!
20