Monacor TVCCD-600COL Mode D'emploi page 12

•
GB Protect the camera against impurities, humidity,
and heat (permissible operating temperature range
0-40 °C).
•
For the cleaning only use a dry cloth, by no means
chemicals or water.
•
If the camera is used for purposes other than orig-
inally intended, if it is connected in the wrong way
or not repaired by skilled personnel, no liability can
be taken over for possible damage.
3 Applications
The PAL colour camera TVCCD-600COL has es-
pecially been designed for monitoring and alarm
systems. Due to its small dimensions an easy mount-
ing is possible at any desired place.
4 Lens
All lenses with a C mount or CS mount thread can be
screwed on.
1) Remove the protection cap.
2) When using a lens with C mount thread, screw it
onto the black adaptor ring (4).
When using a lens with CS mount thread, screw
off the black adaptor ring (4) and mount the lens
onto the thread ring (3).
The camera is equipped with a connection for an iris
control (1). Therefore, a lens with a video signal con-
trolled iris (auto iris) is especially recommended.
Connect the cable of the lens as follows to the en-
closed plug (see also fig. 3):
pin 1 = operating voltage 12 V
pin 2 = ground
pin 3 = not connected
pin 4 = video signal 1 Vpp for the iris control
12