Technical Data - Abus AZ4290 Instructions D'installation

13. Technical data

Security level:
Environment class:
Power supply:
Power consumption:
Emergency power supply: None
Number of channels:
Display:
Outputs:
Inputs:
2 EN 50131-1 and -3 :2007-04
II, EN50131-1 or EN50130-5
Operating temperature: -10 °C to +55 °C, EN50130-5 Clause 8 (+55 °C) and
Clause 10 (-10 °C), with average relative humidity 75%, non-condensing
10-14 V DC, 12 V DC nominal, device protected by pole protection diode
max. 300 mA
8 device channels
8 PIN/proximity chip key channels
10 LEDs, visible from the outside when housing is closed.
8 blue LEDs for channels and programming
1 red LED for faults
1 green LED to display the power supply
6 semi-conductor relays with potential-free contacts (can be set to NO or NC) for
Tamper
Panic
Activation command
Internal activation command
Low battery
Supervision or Jamming
Maximum switching power
U DC max =
I DC max =
U AC max =
I AC max =
Forward resistance of <=2 Ω
Lock resistance >=50 MΩ (at a maximum creepage of 1 µA at 50 V)
10, voltage-controlled, for
Alarm centre activated
Alarm centre internally activated
Not ready for activation or general fault
Flash
Siren in case of alarm
Setup mode
Siren in case of fire
Input time info beep
Output time info beep
Error during output time info beep
48 V DC
500 mA
30 V AC rms
350 mA rms
50