Key Functions; Extra Functions; Power On; Workout - Tunturi Pure U bike 1.1 Mode D'emploi

Key functions

Total reset :
Console will reboot and starts in factory
setting menu.
Recovery key :
Test heart rate recovery status.
Down key :
In setting selection lower value.
Mode key :
Confirm setting or selection
Up key :
In setting selection upper value.
Reset key :
When press and hold for 2 seconds,
display will reboot and start from main
menu. (all shown data will be lost)
Return to main menu.
Start/ stop key :
Start workout when in idle mode.
Stop/ pause workout when in active
mode.

Extra functions

• Choose speed/ distance units by
using the Metric/ Imperial switch
located on the back cover of the
console
Batteries must be reinstalled to apply
the change.
• Choose temperature units to display
by using the C/F switch located on
the back cover of the console.
Batteries must be reinstalled to apply
the change.
• Scan symbol is displayed in the
upper left corner when display is in
scan mode. You can switch scan
mode on and off by pressing "enter"
in exercise mode.
• When setting one or more targets,
the target value starts to count up
when reached "0"
• The console requires 2x1.5V AA type
batteries to be installed in the battery
housing on the back of the console.
10

Power on

Plug in power supply, computer will
power on and display all segments on
LCD for 2 seconds.
Press up and/ or down button to set
calender and time setting right.
Press Mode button to confirm
Note:
After 4 minutes without pedaling or
pulse input, console will enter into power
saving mode.
In power save mode press any key to
wake the console up.

Workout

Quick start

Start training by pedaling. All workout
information will count up. (time, distance,
calories)

Manual mode

Set target first by pressing "Mode" to
enter manual program.
Use up/ down key to set limit for: Time,
distance and/ or calories.
Start pedaling and console will have
"beep" sound for 8 seconds when target
value has count down to "0"