User interface
FUNCTIONAL BUTTON
MODE
•
Press MODE button to select console
functions; TIME, COUNT, TOTAL
COUNT and CALORIES.
Push and hold for 4 seconds to reset:
•
TIME, COUNT and CALORIES
SET
Set the values for: TIME, COUNT and
CALORIES when not in scan mode.
•
Press SET button to set console in
goal input mode.
•
Press MODE to select goal you like
to set. (the selected goal will blink
when able to set value.)
•
Press SET Button to higher the goal
input, hold SET button to higher the
value fast.
•
Press RESET button shortly to reset
the changed selected goal.
•
Press MODE Button to active next
optional goal to be set.
1st goal to be set is: TIME
+ 1 min
( 1 ~ 99)
2nd goal to be set is: CNT
+10
( 1 ~ 9990 )
3rd goal to be set is: T.C.
cannot change
4th goal to be set is: CAL
+ 1
( 1 ~ 999 )
User manual • Cardio Fit Row R30
NOTE:
•
When you set a goals the set goal
value will count down in active mode.
•
When goal is reached the console
will notify by 4 dual acoustic beep
signals. The reached value will now
count up starting from "0".
•
You can set more than one goal,
all goals will notify when goal is
reached.
RESET
Push and hold for 4 seconds to reset:
•
TIME, CALORIES and PULSE.
NOTE:
TOTAL COUNT can only be reset by a
batteries exchange.
FUNCTIONS AND OPERATIONS
SCAN
Automatically scan functions for :
TIME, COUNT, TOTAL COUNT and
CALORIES..
Each display will be hold 4 seconds
TIME
Automatically accumulates workout time
when exercising.
COUNT
Automatically accumulates the number
of steps when exercising.
TOTAL COUNT
Automatically accumulates the number
of steps for all exercise sessions.
CALORIE
Automatically accumulates calories burnt
when exercising.
NOTE:
•
If the display is faint or shows no
figures, please replace the batteries.
•
The monitor will automatically shut
in standby mode if there is no signal
received after 4 minutes.
•
The monitor will be auto-powered on
when starting to exercise or at the
push of a button.
GB
11