Intended Use; Transport And Storage - Camille Bauer KINAX WT720 Mode D'emploi

Operating Instructions
KINAX WT720, absolute, programmable angular postion transmitter
1. Safety instructions
1.1 Symbols
The symbols in these instructions point out risks and have
the following meaning:
Warning in case of risks.
Non-observance can result in malfunc-
tioning.
Non-observance can result in malfunctio-
ning and personal injury.
Information on proper product handling.

1.2 Intended use

The KINAX HW730 transmitter is a precision instrument.
•
It serves the acquisition of angular position, processing
and the provision of measured values as electric output
signals for the downstream device. Use the transmitter
for this purpose only.
• The angular position transmitter is not intended to measure
rotation speed.
The device is intended for installation in industrial plants
•
and meets the requirements of EN 61010-1.
Device versions with explosion protection may only be
•
used in the planned application area. The operation in
other explosive atmospheres is not permissible.
Manufacturer is not liable for any damage caused by
•
inappropriate handling, modifi cation or any application
not according to the intended purpose.
1.3 Commissioning
Installation, assembly, setup and commis-
•
sioning of the device has to be carried out
exclusively by skilled workers.
Observe manufacturer's operating instruc-
•
tions.
Check all electric connections prior to
•
commissioning the plant.
If assembly, electric connection or other
•
work on the device and the plant are not
carried out properly, this may result in
malfunctioning or breakdown of the device.
Safety measures should be taken to avoid
•
any danger to persons, any damage of the
plant and any damage of the equipment
due to breakdown or malfunctioning of the
device.
Do not operate the device outside of the
•
limit values stated in the operating instruc-
tions.
12
1.4 Repair work and modifi cations
Repair work and modifi cations shall exclu-
sively be carried out by the manufacturer.
In case of any tampering with the device,
the guaranty claim shall lapse. We reserve
the right of changing the product to im-
prove it.
1.5 Disposal
The disposal of devices and components
may only be realised in accordance with
good professional practice observing the
country-specifi c regulations.

1.6 Transport and storage

Transport and store the devices exclusively
in their original packaging. Do not drop
devices or expose them to substantial
shocks.
2. Scope of delivery
1 Absolute, programmable transmitter KINAX WT720
1 Operating instructions in German, French and English
1 Type examination certifi cate, only for Ex version devices
ATEX
3. Application
The KINAX WT720 is a robust, absolut and programmable
angular position transmitter which is owing to the high ca-
sing protection category and the wide temperature range
ideal for applications in rough environments. He converts
the angular position of a shaft into a load independent
direct current signal, proportional to the angular position.
The unit is contact free.
4. Main features
• Absolute, robust industrial model suitable for fi eld appli-
cations
• 4...20 mA, 2-wire
• Low-wear and low annual maintenance thanks capaci-
tive measuring principle
• High degree of sealing against water and dust
(IP67 / IP69k)
• Steadfest against high mechanical loads
• Free programmable without tools
• With explosion protection „Ex ia IIC T4 Gb",
„Ex ia IIIC T80°C Db" and „Ex tb IIIC T80°C Db"
according to ATEX and IECEx available
• Available with GL (Germanischer Lloyd)