Advance Adfinity 20D Instructions D'utilisation page 16

ENGLISH
Types of brush/pad available and application guide (suggestions only)
Models
General cleaning:
Concrete
Terrazzo fl oor
Ceramic tiles/quarrystones
Marble
Vinyl tiles
Rubber tiles
Polishing:
Rubber tiles
Marble
Vinyl tiles
Cylindrical brush installation/removal
1. Turn the ignition key (80) to "0" position.
2. Lift the cylindrical brush deck by pressing the pedal (11).
3. Remove the handwheels (A, Fig. 3) and the lids (B) by pushing them downwards and pressing on the handwheels.
4. Install the cylindrical brushes (C).
The cylindrical brushes can be installed on either sides.
5. Install the lids (B) and fasten them with the handwheels (A).
6. To remove the cylindrical brushes, carry out steps 1 to 5 in the reverse order.
A
B
C
14
INSTRUCTIONS FOR USE
MIDLITE GRIT 180
D
9096910000(2)2010-03
MIDGRIT 240 PROLENE
E
Figure 3
Adfi nity™ 20D - X20D - X20C - X24D
PROLITE UNION MIX
A
B
C
S311318