Cleaning And Care; Disposal - LIVARNO LUX HG04245A Instructions De Montage, D'utilisation Et Consignes De Sécurité

change the position of the rotary
control SENS
18
tion of the motion detector
Note: Please note that the
motion detector
detects movements transverse
to the motion detector
you move directly towards the
motion detector
detect this movement.
When you have aligned the
motion detector
rily, re-tighten the fastening
screw to fix the adjustment.
8
Turn the rotary control LUX
to the desired position. These
can be determined during the
dawn or twilight hours during
which the spotlight
respond.
Slowly turn the rotary control
LUX clockwise until it reacts
19
to movement within the cover-
age area.

Cleaning and care

Before cleaning, remove the
fuse or switch off the circuit
breaker at the fuse box.
or the orienta-
.
9
primarily
9
. If
9
, it cannot
9
satisfacto-
9
19
should
1
Never immerse the product in
water or other liquids. Otherwise
the product can be damaged.
Clean the product with a lint-free,
slightly moist cloth and mild
cleaning agent.
Reconnect the fuse or circuit
breaker for use after cleaning.

Disposal

The packaging is made entirely of
recyclable materials, which you
may dispose of at local recycling
facilities.
Observe the marking of
the packaging materials
b
a
for waste separation,
which are marked with abbrevia-
tions (a) and numbers (b) with fol-
lowing meaning: 1–7: plastics /
20–22: paper and fibreboard / 80–
98: composite materials.
The product and pack-
aging materials are re-
cyclable, dispose of it
separately for better waste treat-
ment. The Triman logo is valid in
France only.
GB/IE/NI 13