Güde KS 450 B Traduction Du Mode D'emploi D'origine page 35

KS 400 BW | KS 450 B | KS 501 B
Inspection and maintenance plan
Generally
Before any start-up
After every take out of
service
storage
Complete saw
Plastic body
Saw chain
Chain saw bar
Chain saw wheel
Chain break
Clutch
Saw chain
Chain saw bar
Chain lubrication
Chain break
Follow-up brake
ON/OFF switch
Oil tank cap
Chain saw bar
Bar fi xture
Chain oil tank
Saw chain / Chain saw bar
Complete saw
Regularly clean the outer part
Let regularly checked by authorized workshop
Check for cracks and fi ssures
Let regularly sharpen
Clean regularly
Clean regularly
Regular functional test
Regular functional test (Chain can not move in idle run).
Check for damages and sharpness
Check the chain tension
Functional test
Functional test
Functional test
Functional test
Check for tightness
In case damage let repaired in authorized workshop
Clean the oil top-up opening
Clean above all guiding oil groove
Drain
Dismount, clean and lubricate slightly by oil Clean the
saw guiding groove
Cleaned chain saw store safely in dry room - out of
children reach.
Let the chain saw checked by authorized workshop
after long term storage (remaining oil can be resinous
and clog the oil pump valve)
ENGLISH
31