HumanTechnik A-3310-0 Mode D'emploi page 17

Direct fixation to the bed frame:
Note: For this fixation method, four wood screws (not included), a suitable screwdri-
ver and means for marking the position are needed.
Determine a position on the bed frame where the vibrating contraption can be
screwed on securely and which also transmits the generated vibrations well to the
mattress. Also consider the length of the vibrating contraption's cable(s).
Get convenient access to the selected location where you want to install the vibra-
ting contraption. The steel struts and their fixing material are not needed for this
type of installation.
Image 5):
Select the length of the wood screws so that they do not puncture the other side of
the bed frame when screwed in.
Hold the housing in place and mark the position of the mounting holes on the bed
frame.
If necessary, prick or drill the marked points on the wood of the bed frame so that
fixing the screws is easier during assembly.
Screw the vibrating contraption to the bed frame.
English 17