HumanTechnik A-3310-0 Mode D'emploi page 12

Thank you for purchasing the vibrating contraption! You have chosen an effective
and reliable product.
Please read this user manual with care, so that you are able to correctly install and
use the device.
Package contents
Please make sure that the following parts are included:
- vibrating contraption with power supply
- 8 x steel struts
- 8 x carriage bolts M6 x 30 mm
- 4 x washers for M6
- 4 x serrated washers for M6
- 4 x plastic washers for M6
- 4 x plastic sleeves
- 4 x self-locking nuts M6
- 4 x wingnuts M6
- user manual
- warranty card
Should any parts be missing, please immediately contact your dealer or the ma-
nufacturer directly.
Safety advice
- Please read this manual thoroughly before using and putting the device into
operation.
- Keep this user manual safe so that it is also accessible for other users at any time.
- Choose the laying of the cables so that there are no sharp bends and no danger
of tripping or strangulation.
Function
The vibrating contraption is fixed to the mattress support or the frame of the bed.
The vibrating contraption is activated the following way, according to the model:
- A-3310-0: by the signal of a Humantechnik alarm clock
- A-3311-0: by power supply activated by a programmable time switch or other
power-switching devices.
Within the contraption, there is an electric motor with unbalanced mass. When ac-
tivated, strong vibrations are generated by it which wake the sleeper up.
12 English