Publicité
Les langues disponibles
Les langues disponibles
Fixation to a spring frame:
Note: A 10 mm size wrench is needed for the assembly.
Remove the mattress from the bed and prop up the spring frame, so that you are
able to comfortably work on the underside of the frame.
Image 3):
Take one of the carriage bolts and put it through the end of one of the struts (1),
followed by a plastic washer (3).
Stick the bolt, together with the strut and plastic washer from the underneath into
one of the fixation holes of the contraption housing.
Put a plastic sleeve (2) over the end of the bolt, add a second strut (4), followed by
a washer (5) and a self-locking nut (6). Do not tighten the the nut yet.
Repeat until all four corners of the contraption are equipped with such fixation
arms.
English 15
Publicité
