Storage And Browse; Store Measurements; Browse Measurements; Delete Measurements - Wohler LD 400 Mode D'emploi

7

Storage and Browse

7.1

Store Measurements

(long press)
7.2

Browse Measurements

7.3

Delete Measurements

(long press)

To store a current reading, long press the
MEMORY-key for 3 seconds, until the memory
icon appears on screen.
The reading will be automatically stored into the
meter's built in memory. The stored values will not
be lost after the meter has been switched off and
on again.
NOTE!
Take care to leave the memory mode before
switching off the meter. If not, all data will be
deleted.

Press the MEMORY-key to check stored
measurement data.

Press the PLUS- and MINUS-key to browse
forward or backward.

Short press the CLEAR-key to enter normal
measuring mode again.

Long press the CLEAR-key to remove all
stored records.
Storage and Browse
EN
41