Hobs and Combinations
7.3
Replacing the gas cylinder
!
WARNING! Risk of injury
Only replace the gas cylinder when there is good ventilation
Make sure that there is no source of ignition nearby.
Only change the gas cylinder when the device is not in use and the gas
supply to the device is switched off.
➤ Switch the device off by turning the knob to the zero setting.
➤ Close the valve on the gas cylinder.
➤ Replace the gas cylinder according to the instructions from the gas fitting
manufacturer.
8
Cleaning the device
!
CAUTION! Hot surface
The surface may still be hot. Keep children away.
Let the device cool down to ambient temperature before you touch it
with bare hands.
A
NOTICE!
Do not use any sharp or hard objects for cleaning since they may
damage the device.
Only use standard commercial cleaning agents.
Do not use a steam cleaner to clean the device.
➤ Clean the device as shown (fig. c, page 10).
EN
Cleaning the device
23