Using The Timer; Locking The Control Panel; Switching The Induction Cooktop Off; Using Compatible Cookware - Dometic CI-21 Manuel D'installation Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Cleaning and Maintaining the Induction Cooktop

5 .7 Using the Timer

Use timer mode with temperature or heat mode to select
how long you want the Cooktop to run.
1. While in temperature mode, press TIMER. The
"timer" indicator will light up and "0:00" will blink on
the screen.
2. Press "+" or "–" to adjust the time duration. You can
set the timer for one minute to three hours.
I
Press the adjustment buttons briefly to change the
time by one minute increments. Press and hold to
adjust by 10 minute increments.
3. When the countdown is done, the Cooktop will beep
until you press any key to turn off the timer.

5 .8 Locking the Control Panel

• To lock the Cooktop, press "+" and "–". The lock
indicator will light up.
• To unlock the Cooktop, press "+" and "–". The lock
indicator will turn off.
I
While locked, removing a pan or pressing the ON/
OFF button will turn the Cooktop off.
5 .9 Switching the Induction
Cooktop Off
When the operating time is over, the induction cooker
switches off automatically.
If switch-off is needed in advance, press the "On/Off"
button to turn the appliance off.

5 .10 Using Compatible Cookware

Magnetic
Magnetic
stainless steel
stainless steel
Enamel stainless
Enamel cooking
steel kettle
7 Compatible Cookware
10
Iron pan
Iron kettle
Iron plate
utensil
• Induction-compatible cookware contains
ferromagnetic materials. In other words, it contains
iron or has a layer with magnetic properties.
• Cookware must have a flat,smooth bottom with the
diameter more than 5 in. (127 mm) and less than
8 in. (203 mm).
• After the first use, some white spots will appear at the
bottom of the pot. This is normal. Please pour some
vinegar into the pot, heat it at about 140°F – 176°F
(60°C – 80°C), and then wipe the spots away with a
brush.
• Aluminum, copper or glass cookware will not work
unless they have a layer on the bottom with magnetic
properties.
• If the pot is removed, the induction cooker will
stop heating immediately. A buzzer sounds for
10 seconds, then it will go into standby mode
automatically.
I
To tell if a pot or pan is induction-compatible, hold
a magnet to the bottom. If the magnet clings, the
cookware will work on an induction Cooktop.
6 Cleaning and Maintaining
the Induction Cooktop

WARNING: ELECTRICAL SHOCK HAZARD .
Failure to obey the following warnings could
result in death or serious injury:
• This Cooktop should be kept clean during and after
use. Protect the Cooktop from infestation, dirt, and
humidity. Avoid letting anything fall into the interior of
the Cooktop, which could result in a short circuit of
the electrical components. Do not handle the plug
with wet hands. This could result in electric shock.
• To protect against fire, electric shock, and injury
to persons, do not immerse cord, plugs, or the
Cooktop in water or other liquid. Do not directly
rinse this Cooktop under water. Do not spill water,
soup, or other liquids into the internal parts of the

Cooktop.

Induction Cooktop
EN

Publicité

Chapitres

Table des Matières
loading

Table des Matières