Cleaning The Device - Dometic CE 88-ZF + Grill Notice D'utilisation

CE 88-ZF + Grill
7.8 Replacing the gas cylinder
WARNING! Beware of injury
!
Only change the gas cylinder in well-ventilated areas.
Make sure that there are no ignition sources in the vicinity.
Only change the gas cylinder when the device is switched off.
➤ Completely close the valve on the gas cylinder.
➤ Unscrew the pressure regulator from the gas cylinder.
➤ Check the condition of the gas hose.
Replace the hose line if the material is brittle or porous.
➤ Screw the pressure regulator firmly onto the new gas cylinder by hand.
8 Troubleshooting
Repairs to the gas supply parts on the device may only be carried out by a
qualified technician.
➤ Shut off the gas supply immediately if a fault occurs.
➤ Check again for any damage to the device.
➤ Replace the damaged parts.
➤ Only use the device again once all the faults have been rectified.
9

Cleaning the device

NOTICE!
A
Do not use any sharp or hard objects for cleaning since they may
damage the device.
Only use standard cleaning agents.
➤ Allow the device to cool down properly before cleaning it.
➤ Clean the surfaces. Pay special attention to removing sticky fat and oil
residue.
➤ Do not use a steam cleaner to clean the device under any circumstances.
➤ Allow the device to dry before packing and storing.
EN
All manuals and user guides at all-guides.com
Troubleshooting
15