Güde WX 125 Traduction Du Mode D'emploi D'origine page 9

Introduction
To enjoy your new electric snow blower as long as possible,
please read carefully the Operating Instructions and the
attached safety instructions before putting it into operation.
Further, we recommend keeping the Operating Instructions in
order to recall the product features in the future.
To follow the continuous product development. we
reserve the right to make technical changes for any
further improvement.
Translation of original operating instructions
Supply includes
Take the appliance out of the transport package and check it
whether there are the following parts:
#58000 WX 125 ANGLE GRINDER:
1 piece Angle grinder
1 piece Case
1 piece Spanner
1 piece Handle
1 piece 125 mm dividing wheel for metal
1 piece 125 mm roughing wheel for metal
1 piece 125 mm diamond wheel
2 pcs Spare carbons
2 pcs Protection cover
1 piece User's Guide
#58005 WX 230 SE ANGLE GRINDER:
1 piece Angle grinder
1 piece Case
1 piece Spanner
1 piece Handle
3 pcs 230 mm dividing wheel for metal
2 pcs Spare carbons
2 pcs Protection cover
1 piece User's Guide
Please contact your dealer if any parts are missing or are
damaged.
#58000 appliance description (pic. I)
Professional angle grinder with spindle lock, adjustable cover,
handle with left/right application positions.
a WX 125 angle grinder
b Handle
c Protection cover for rough machining
d Flange wrench
e Spindle lock
f Spare carbons
g On/Off
h 125 mm dividing wheel for metal
i 125 mm roughing wheel for metal
i 125 mm diamond wheel
k Protection cover for dividing
#58005 appliance description (pic. II)
Professional angle grinder with spindle lock, adjustable cover,
Soft-Grip handle, second handle with 3 application positions,
starting current limiter (soft start)
a WX 230 SE angle grinder
b Handle
c Wheel protective cover
d Wheel installation wrench
e Spindle lock
f Spare carbons
g On/Off
h 230 mm dividing wheel for metal
Technical specifications
Voltage/frequency:
Protection class:
Output:
Wheel diameter:
Revolutions:
Feeder cable:
Noise:
Cable length:
Weight:
Order No.
Voltage/frequency:
Protection class:
Output:
Wheel diameter:
Revolutions:
Feeder cable:
Noise:
Cable length:
Weight:
Order No.
* Noise information
Measured values found out in accordance with 2000/14/EG
(1.60 m height, 1 m distance) – measurement tolerance +-
3dB
General safety instructions
The Operating Instructions must be read thoroughly
before using the appliance for the first time. If there are
any doubts regarding the appliance connection and
operation, please contact the manufacturer (service
department).
PLEASE FOLLOW CAREFULLY THESE INSTRUCTIONS
TO ENSURE A HIGH SAFETY LEVEL:
The manufacturer cannot be held liable if its appliances are
changed in an unauthorised manner and if personal or
material damage is incurred as a result of such changes.
CAUTION!
•
Keep the place of your work clean and tidy. Mess in
the place of your work and on the work table increases
the risk of accidents and injuries.
•
Do not let other persons to the appliance. Keep
visitors and bystanders, especially children and
physically weak persons, in safe distance from the place
of your work.
•
Make sure your appliances are stored safely. Keep
appliances that are not being used in a dry place,
elevated if possible and lock them to make them
inaccessible to other persons.
• At all times, use the right appliance for your specific
work. Do not use e.g. small appliances or accessory
equipment for works that actually need to be performed
by big appliances. Use your appliances solely for
purposes for which they have been designed. Do not
overload your appliance!
•
Provide adequate clothing. Clothing must be practical
and not affect you in your work.
•
Wear protective glasses. Items may get thrown-away
and hit you.
• Wear ear protection. Wear personal ear protection, e.g.
ear pegs.
•
Hand protection. Wear solid gloves. Leather gloves
offer good protection.
9
WX 125
230 V~50 Hz
II
900 W P1
125 mm
-1
11,000 per min
H05VV-F 2x0.75 mm²
Lwa 87 dB(A) *
Lpa 98 dB
2 m
3 kg
58000
WX 230 SE
230 V~50 Hz
II
2,350 W P1
230 mm
-1
6,000 per min
H07RN-F 2x1.5 mm²
Lwa 107 dB(A) *
Lpa 96 dB
2 m
8 kg
58005