Publicité
Les langues disponibles
Les langues disponibles
Transport and storage
For transport purposes, the appliance must
necessarily be secured against falling or turning
over
When storing the appliance, it is necessary to make
sure that the appliance is kept in a dry place
inaccessible to children and unauthorised persons.
Clean the appliance thoroughly
before storing it for a long time.
Servicing and treatment
Caution - risk of life by electric shock! Unplug the appliance
before any cleaning and treatment. Caution - risk of appliance
damage! Never clean the appliance under running water or in
rinsing water. Do not use aggressive cleaners or hard items
for cleaning as they could damage the appliance. Wipe the
appliance with a wet cloth from time to time.
The angle grinder itself does not require any special servicing.
At regular intervals and every time the appliance is
to be started, check the wheel if fitted tightly.
Replacing the grinding wheel (pic. IV)
1.
Unplug the appliance!
2.
Press the lock and let the wheel snap in.
Caution! Press the spindle lock only when the
engine and grinding spindle are idle!
3.
Open the clamping flange using the attached spanner.
4.
Replace the wheel and retighten the clamping flange
using the spanner.
5.
For grinding and dividing from 3 mm and less, the
clamping flange must be fitted in a way the flat side of
the flange sits on the wheel.
Troubleshooting
Problems
Possible causes
Appliance not
Carbons are worn
rotating
out
Dividing or
roughing wheel is
not fitted
Appliance is not
plugged
Cable is damaged
Appliance
Ventilation slots
getting warm
are obstructed with
too quickly
dust
Measures
Have the carbons
replaced by an
electrician.
Fit the dividing or
roughing wheel.
Plug the appliance.
Have the appliance
repaired by an
electrician.
Remove the dust
13
Maintenance
Do you have any technical questions? A claim? Do you
need spare parts or the Operating Instructions?
You will be helped quickly and without needless
bureaucracy at our webpage www.guede.com in the
Services section. Please help us be able to assist you. To
identify your machine when claimed, we need to know its
serial No., order No, and year of production. All these
details can be found on the type label. Enter the details
below for future reference.
Serial No.
Order No.
Year of production:
Tel.
+49 (0) 79 04 / 700-360
Fax:
+49 (0) 79 04 / 700-51999
Email:
support@ts.guede.com
Publicité
