Declaration Of Conformity - Erreka TOPO Manuel De L'installateur

DESCRIPTION OF THE PRODUCT
Lock
6

DECLARATION OF CONFORMITY

Erreka Automatismos declares that the TOPO operator
has been designed for use in a machine or for assembly
along with other elements in order to form a machine
in line with Directive 2006/42/EC.
Th e T OP O e le c t r o m ec h a n ica l o p e r at o r al lo w s
installations in line with Standards EN13241-1 and
EN12453.
46
Installation manual

In order to restart automatic operation of the
system, carry out the following operations:
1 Rotate the unlocking lever (1) until it is located
underneath the base (2) (A).
2 Rotate the key as shown in figure (B).
3 Move the gate until its base (2) is aligned with the
arm (3) (C).
The TOPO electromechanical operator complies with
safety legislation in line with the following directives
and standards:
• 2006/95/EC (low voltage)
• 2004/108/EC (electromagnetic compatibility)
• UNE-EN 60335-1 and UNE-EN 60335-2-103