Signature SRB3000 Manuel D'utilisation page 62

indicator that will allow you to control the average temperature in the coldest zone. indicator that will allow you to control the average temperature in the coldest zone.
WARNING C: This indicator is intended to work only with your refrigerator, be This indicator is intended to work only with your refrigerator, be
careful not to use it in another refrigerator (in fact, the coldest zone is not the careful not to use it in another refrigerator (in fact, the coldest zone is not the
same), or for any other use.
Checking the temperature in the coldest area.
WARNING C: This indicator is intended to work only with your refrigerator, be
careful not to use it in another refrigerator (in fact, the coldest zone is not the careful not to use it in another refrigerator (in fact, the coldest zone is not the
same), or for any other use.
Checking the temperature in the coldest area.
Once the temperature indicator has been installed, you can regularly check that
the temperature of the coldest area is correct, and, if necessary, adjust the the temperature of the coldest area is correct, and, if necessary, adjust the
thermostat accordingly as indicated above.
For the proper conservation of food in your refrigerator and in particular in the For the proper conservation of food in your refrigerator and in particular in the
coldest area, make sure that the temperature indicator appears "OK". If "OK" does make sure that the temperature indicator appears "OK". If "OK" does
not appear, the average temperature of the zone is too high. Set the thermostat to not appear, the average temperature of the zone is too high. Set the thermostat to
a higher position.
Whenever the thermostat is changed, wait for the temperature inside the Whenever the thermostat is changed, wait for the temperature inside the
appliance to stabilize before carrying out a new adjustment, if necessary. Only tabilize before carrying out a new adjustment, if necessary. Only
change the position of the thermostat gradually and wait at least 12 hours before change the position of the thermostat gradually and wait at least 12 hours before
carrying out a new check and any modification.
NOTES: After loading the appliance with fresh food or after repeated opening (or
prolonged opening) of the door, it is normal that the inscription "OK" does not prolonged opening) of the door, it is normal that the inscription "OK" does not
appear in the temperature indicator.
Wait at least 12 hours before readjusting the thermostat.
• The manufacturer and the dealer cannot be held responsible for any accident or
damage caused by improper use of the device, or if the instructions given in this damage caused by improper use of the device, or if the instructions given in this
manual have not been followed.
We decline liability for any damage or accident derived from any use of this We decline liability for any damage or accident derived from any use of this
s intended to work only with your refrigerator, be
alled, you can regularly check that
58
repeated opening (or
for any accident or