Before Installing The Appliance - Signature SRB3000 Manuel D'utilisation

functions and operating methods will not change. Please feel free to use!
• If you use the refrigerator for the first time, remove the adhesive tapes of the
drawers, balconies, egg tray, and the drain tube plug.
• Do not pull or push the drawers and balconies fiercely during use in case of
damage.
• Adjusted the temperature control as higher as you could accept, which will save
the energy consumption of the refrigerator and your money;
• Don't open the refrigerator door continually if it is in the normal working
situation.
• Keep the combination of drawers, baskets and shelves of the refrigerator is
consistent with its original standard.

BEFORE INSTALLING THE APPLIANCE

Before connecting your appliance to the power supply, check that the voltage
stated on the rating label of your appliance corresponds to the voltage in your
home. A different voltage could damage the appliance.
The plug is the only way to unplug the appliance and should therefore be accessible
at all times. To turn off main power to the appliance, turn it off and then detach
the plug from the outlet.
The appliance must be grounded. The manufacturer is not responsible for damages
that may occur as a result of usage without grounding.
INSTALLATION
1. The refrigerator should be located in a completely at surface , Leave
5~10 cm between each side of the appliance and the wall, and leave 30 cm
between the top of the appliance and the ceiling.
2. Choose a location which is not exposed to
sunlight, high temperature or humid, as humidity may cause stain.
42