Programmable Electronic Lock - SentrySafe Fire-Safe Série Manuel Du Propriétaire

Preparing your safe for first time use
1
2
3
M100TEST
SN100TEST01*
12345
WARNING
Test your code several times before putting valuables inside.
Unlocking your safe
1

Programmable Electronic Lock

NOTE: • Store code (and keys if equipped) in a secure location
(other than in the safe).
Ensure any shipping screws have been removed. Located on
the inside of the door.
NOTE: Your unit may or may not have a shipping screw.
• DO NOT RETURN! Questions or concerns, call us at
1-800-828-1438.
Slide out the battery drawer on the side of the keypad.
A
Insert 4 AAA alkaline batteries (not included).
B
NOTE: Do not use rechargeable batteries or any other type
of non-alkaline battery. Do not mix old and new
batteries. Do not mix alkaline and standard batteries.
Slide battery drawer back into keypad.
C
Find your code on the back of this owner's manual.
FOR DUAL KEY/COMBINATION LOCKS ONLY
Keys are located inside your safe. Be sure to remove them
before locking your safe.
FOR DUAL KEY/ELECTRONIC LOCKS ONLY, insert key into
the lock, turn to the 'unlocked' position to open the safe, then
remove the key.
This is a secondary locking feature not an override key.
6