Troubleshooting - X-Rite i1 Pro Manuel De L'utilisateur

Troubleshooting

28
Diagnostic Software
Use the i1Diagnostics software if you believe your i1Pro is not functioning properly.
In this case please perform the following steps:
1. Launch i1Diagnostics Software.
2. Perform a functionality check by following the instructions given from the
i1Diagnostics Software.
3. If i1Diagnostics software reports an error store the test report and contact your
nearest X-Rite Support Center. As an alternative you can also take a look at our
online support resources www.xrite.com/support/i1Profiler to troubleshoot your
issue.
EN
29